3X5 Rosin Press Plates

Recently, Rosin Press Plates received a notice from our payment processors stating our

Business violates its Services Agreement. We believe this is due to the content and certain keywords on our site. (e.g., Rosin, Vape, Extraction) To remove some of those words would

mean we'd need to change our web and email addresses, as well as all of our social media account information. Doing so would leave our previous customers without any access to customer service should they have a problem. Since customer service is the lifeblood of our company, we had to think outside the box.

 

To rectify this, we've decided to stop all sells from Rosin Press Plates. From here forward, rosinpressplates.com will be available as a blog that documents a DIY Rosin Press being assembled using aluminum plates from www.rppmerch.com. Previous customers of

Rosin Press Plates will be happy to hear we'll continue to honor all warranties from products bought through the site until March 15, 2020. We apologize for any inconvenience, and we'll be working on adding new content to the site quickly.

 

If you do visit www.rppmerch.com to make an order make sure you enter your name below to reveal a 5% discount code for www.rppmerch.com. The discount is good for purchases

over $150.

Note: Please fill out the fields marked with an asterisk.

3X5 Inch Rosin Press Plate Kit

  • 1 dual PID Temp Controller
  • 1 set of Rosin Press Plates. Top and bottom plate. Fits ram up to 2 inches.
  • 2 Heating rods. (150w per rod) with 5 Pin XLR plug, built-in thermocouple, and fireproof Kevlar sheath.
  • 1 6-foot Power cord.
  • 1 6mm hex wrench with 3 sets of screws.
  • Rosin Press Plate Sizes: 3X5 Inch Thickness: 1" 3/16" machined 6061 aluminum
  • Temperature control: 0-1300f
  • Digital Display
  • Voltage input: 110-240
  • Max Power: 300w
  • Installation Guide
  • 1. Connect rods with the rosin press plates.
  • 2. Plug the heating rod into the PID Control Box.
  • 3.Connect the Power Cord to the PID Control Box.
  • 4. Connect the rosin press plates to the punch press.
3X5 Rosin Press Plate Kit

$199.99

  • Available
  • Ships within 1-14 days1

3X5 DIY Rosin Press Plate Parts

3X5 DIY Rosin Press Plate Parts

Building your own Rosin press? Need Parts? Now you can order only what you need.

 

Choose from the options below.

Option 1

  • 1 dual PID Temp Controller with power cable.

Option 2

  • 2 Heating rods. (150w per rod) with 5 Pin XLR plug, built-in thermocouple, and fireproof Kevlar sheath.

Option 3

  • 1 set of Rosin Press Plates. Top and bottom plate. Fits ram up to 2 inches. Set screws included. Heating rods NOT INCLUDED.
Option 4
  • 1 set of Rosin Press Plates. Top and bottom plate. Fits ram up to 2 inches. Set screws included. Heating rods INCLUDED.

 

Heating Rods and PID may not be compatible with other units. 

$129.99

  • Available
  • Ships within 1-14 days1